Meridian Norstar M7208N Telephone £ 44.99+vat

 

 

Click Here To Buy

 

The BT M7208N or known as Meridian Norstar M7208N telephone is ideal for users who need access to a just a few lines, programmable features, and autodial numbers. The Nortel Norstar M7208N provides up to 6 lines and has 8 programmable buttons and a 1-line by 16-character LCD Window

Target Audience

The M7208N is a cost-effective set for users needing only a few programmable features and/or autodial numbers.

Applications

The M7208N can be used as a courtesy phone in lobbies, cafeterias, reception areas, or staff lounges. It is also suited for areas where staff numbers are relatively high compared to the number of telephones needed, such as manufacturing plants, retail departments or repair centers.

Nortel Norstar M7208N Features

  • 8 memory keys with indicators
  • Time & date display
  • Display tilts for easy viewing
  • Handsfree one touch dialling
  • Headset facility
  • Full Norstar features
  • Volume control
  • Wall mountable
  • Available in 3 colours

    •  

    USEFULL FEATURES FOR YOUR M7208N TELEPHONE

    Button Inquiry on your M7208N Phone
    Confirm that your memory button has the correct snap-on cap by checking its programming

  • 1. Rlease all calls and open lines with dial tones.
  • 2. Press FEATURE Key followed by X then 0.
  • 3. Read the display
  • 4. Press FEATURE Key when finished.

    Adgusting display contrast
  • 1. Press Feature X then 7.
  • 2. Press 1 to 9 for the level you want

    Selecting a ring type and volume on Your M7208N Telephone
  • 1. Press FEATURE X then 6.
  • 2. Press 1, 2, 3, or 4 to hear the differant types of rings.
  • 3. While the telephone is ringing press volume up or down to adjust the volume.
  • 4. Press FEATURE to store the ring

    Adjusting recevier or telephone speaker volume
  • 1. Press volume up or down when using the reciver or the speaker.

    To Hold a call on your M7208N Telephone
  • 1. Press HOLD
  • 2. Press HOLD again to return to the call on hold. Check the display for confermation or additional information.

    Making Calls

    Norstar system can have different types of line buttons. Match the line buttons on your telephone with the ones below for instructions on how to use them.

    Internal calls using intercom buttons
  • 1. Pickup the receiver.
  • 2. When right arrow appears beside an extension button, then dial.

    External calls using numbered line buttons
  • 1. Pickup the reciver
  • 2. When right arrow appears beside a numbered line button, then dial OR Press a numbered line button without right arrow, then dial.

    Dialing without lifting the handset on your M7208N Telephone
  • 1. Press line button without indicator arrow, then dial your call.
  • 2. When answered, pickup the reciver, or press HANDSFREE/MUTE.
  • 3. If the call is not answered, or the line is busy, press RLS.

    Programming Memory Button on your M7208N Telephone

    External Autodial
  • 1. If you are on a call or an open line with dial tone, press HOLD or RLS.
  • 2. Press FEATURE X then 1.
  • 3. Press the Key you want to program
  • 4. Dial the external number.
  • 5. Press HOLD to store the number
  • 6. Label your new button.

    Internal Autodial
  • 1. If you are on a call or an open line with dial tone, press HOLD or RLS.
  • 2. Press FEATURE X then 2.
  • 3. Press the Key you want to program
  • 4. Dial the internal number.
  • 5. Label your new button.

    Features
  • 1. If you are on a call or an open line with dial tone, press HOLD or RLS.
  • 2. Press FEATURE X then 3.
  • 3. Press the Key you want to program
  • 4. Press FEATURE and the feature code.
  • 5. Label your new button.

    Erasing memory buttons
  • 1. If your on a call or an open line with dial tone , press HOLD or RLS>
  • 2. Press FEATURE X then 1.
  • 3. Press HOLD to erase the button.

    Changing the TIME and DATE on a Modular or Compact Telephone System
  • 1. Place the programming overlay on any M7208, M7310 or M7324
  • 2. Press FEATURE * * A D M I N (2 3 6 4 6), the display reads Password
  • 3. Enter the Admin password, the default is A D M I N (2 3 6 4 6), the display reads 1. Sys speed dial
  • 4. Press NEXT until the display reads 3. Time and date
  • 5. Press SHOW, the display reads Time
  • 6. Press CHANGE, the display reads Hour:
  • 7. Press CHANGE
  • 8. Enter the hour in two-digit format for the 12 or 24 hour clocks
  • 9. Press NEXT the display reads Minutes
  • 10. Press CHANGE
  • 11. Enter the minutes
  • 12. Press NEXT
  • 13. If you have entered an hour less than 12, the display reads AM or PM. If not, skip to step 15.
  • 14. Press CHANGE to toggle between AM and PM
  • 15. Press RLS to exit

    Changing the TIME and DATE on a Modular or Compact Plus software Telephone System
  • 1. Press FEATURE X X 8463 (TIME) then 23646.
  • 2. Press NEXT or CHANGE depending on what you require.
  • 3. Press Rls once you have finished

    •